Weber® Hose and Regulator a replacement for your Weber® Q®200 / Q2000, Weber® Q300 / Q3000, Weber® Spirit, Weber® Genesis® and Weber® Summit® bbq.
Out of stock - Enter email below to be notified
Warning: Last items in stock!
Replacement Weber® Hose and Regulator
This regulator and hose is also suitable for Weber® Q®200 / Q2000, Weber® Q300 / Q3000, Weber® Spirit, Weber® Genesis® and Weber® Summit® barbecues. It is a 27mm clip on regulator.
The regualtor is intended to be used with Calor Patio Gas type cylinders which have a 27mm valve and must only be used with these 27mm regulators
1. There is no protective cap. Check the top of the valve is clean and free from debris.
2. Ensure the regulator switch is in the off position (3 oâclock position) there will be an audibleclickâ
3. Place the regulator down onto the cylinder valve and press downwards firmly until you hear the regulatorclickâ into place.
4. To turn the gas on, turn the gas on/off switch anticlockwise to the on position. ALWAYS turn the switch to the off position after use.
*Please note that gas supply hoses have a limited life span and we strongly advise consumers to check hoses regularly and to replace them at least every 5yrs as per the manual.